With the improvement of living standards, residents of the housing gradually heating from hot water, heating Heating transition to electric heating approach.
    This product dedicated to electric heating temperature control.
    This product gives full consideration to the convenience of the users and operators concerned about the content of the product thus more practical.

Features

1. Dual temperature sensor control. Effective control of the source of electric heating temperature and air temperature, thereby effectively control power consumption, and greatly reduce the control of both safety and convenience.
2. Large LCD screen and backlight. Make long distance by remote control can view the current environment temperature and the temperature of electric sources such as working conditions.
3. Heating / standby status display. A red lights show state heating, a green light show standby. Remote users can view makes working conditions in order to keep abreast of energy saving.
4. Modalities and agenda of the liberal model portfolio function, maximum six hours can be pre-set. Been on the agenda during each mode of operation of the environmental temperature can be set at any time, making arbitrary users can control the heating time and temperature, including boot, shutdown.
5. Arbitrarily set the number of hours functions. Maximum of six hours.
6. Timing functional diversification. Set up a state in the timing function is to set the agenda mode of the day effective model. In the timing of the use of state functions from the current time (boot state), the number of time after the shutdown function. In any mode can be used. After the shutdown continue to run according to the original model.
7. Temperature settings protection function. Three temperature: 40 degrees, 50 degrees, 60 degrees.
8. Infrared remote-control function, can be dedicated remote control, remote control of appliances can be applied, namely learning mode.
9. Complete shutdown standby function. Currently on the market in LCD temperature controller in the state shutdown standby power consumption of less than 1 W equivalent to the need AC power can be completely cut off standby status, to avoid the occurrence of standby power. This product only through button shutdown standby status, enabling product really in a very low-power standby mode (standby current of less than 3 uA.)
10. Since work insanity protection.
11. Products of self-checking function.
12. Geothermal products laying the installation of real-time detection capabilities. The slabs of the roll-out of the heat, the heat needs Xianpu, followed by cement mortar and the brick laying. During the construction process often took place in the brick laying After that geothermal system is not normal work, therefore, need to set off all the tiles, inspection and heat, time-consuming labour-supplies. In the use of this product can be readily detected in the process of laying bricks to heat the good condition, that once the fault alarm, can make real-time adjustments to the construction and maintenance of the heat source.
13. High reliability. Guojiajishujianduju related products through the EMC product certification testing. Avoid products to maximize the use of the Dead, the abnormal phenomenon from occurring.

Picture

Installation of electrical schematics connection

For example of the ues